FUEL PRESSURE PULSATION DAMPER REMOVAL


  1. DISCHARGE FUEL SYSTEM PRESSURE


    1. Discharge the fuel system pressure Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. DISCONNECT FUEL HOSE

    A00JVGC

    1. Disconnect the fuel hose Click here.

  4. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY

    A00JW1U

    1. Remove the 2 bolts and fuel pressure pulsation damper.