FUEL PRESSURE REGULATOR REMOVAL


  1. DISCHARGE FUEL SYSTEM PRESSURE


    1. Discharge the fuel system pressure Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY


    1. Remove the throttle body with motor assembly Click here.

  4. DISCONNECT NO. 2 FUEL HOSE

    A00K03I

    1. Disconnect the No. 2 fuel hose.

  5. REMOVE FUEL PRESSURE REGULATOR

    A00K1K8

    1. Disconnect the purge VSV connector.

    2. Detach the wire harness clamp.

    3. Remove the bolt and wire harness clamp bracket.

    4. A00JUBO

      Remove the 3 bolts and fuel pressure regulator.