FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type) INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)


    1. A00948ZE01

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Float position is F (upper) 12 to 18 Ω
      Float position is E (lower) 405 to 415 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.

  2. INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)


    1. A009BJGE01

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Float position is F (upper) 12 to 18 Ω
      Float position is E (lower) 405 to 415 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.