DRIVE BELT INSTALLATION


  1. INSTALL FAN AND GENERATOR V BELT


    1. Install the V belt.

    2. A0099F1E02

      While tightening bolt A, adjust the tension of the V belt.

    3. Tighten bolts B and C.

      Torque:
      for bolt C
      69 N*m  { 704 kgf*cm, 51 ft.*lbf }
      for bolt B
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

    4. Check the tension of the V belt Click here.

  2. INSTALL COOLER COMPRESSOR V BELT


    1. Install the V belt.

    2. A009B8WE02

      While tightening bolt B, adjust the tension of the V belt.

    3. Tighten nut A.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

    4. Check the tension of the V belt Click here.

  3. INSTALL VANE PUMP V BELT


    1. Install the V belt.

    2. Using a bar, adjust the tension of the V belt.

    3. A009A8NE01

      Tighten bolt A and nut B.

      Torque:
      for bolt
      48 N*m  { 489 kgf*cm, 35 ft.*lbf }
      for nut
      64 N*m  { 653 kgf*cm, 47 ft.*lbf }

    4. Check the tension of the V belt Click here.

  4. INSTALL AIR CLEANER CASE ASSEMBLY


    1. Install the air cleaner case with the 3 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  5. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  6. INSTALL RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY


    1. Insert the hinge part of the air cleaner cap and hose into the air cleaner case, and then attach the 4 hook clamps.

    2. Connect the air cleaner cap sub-assembly with the clamp.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    3. Attach the wire harness clamp.

    4. Connect the 2 clamps and connector.

  7. INSTALL FRONT FENDER APRON SEAL RH


    1. Install the front fender apron seal with the 4 clips.

  8. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. A00O712

      Hook the engine under cover to the vehicle body as shown in the illustration.

    2. Install the 4 bolts.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

  9. INSTALL FRONT BUMPER COVER LOWER


    1. Install the front bumper cover lower with the 5 bolts and clip.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }