DRIVE BELT REMOVAL


  1. REMOVE FRONT BUMPER COVER LOWER


    1. Remove the clip, 5 bolts and front bumper cover lower.

  2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. Remove the 4 bolts.

    2. A00JXIF

      Unhook the engine under cover from the vehicle body as shown in the illustration.

  3. REMOVE FRONT FENDER APRON SEAL RH


    1. Remove the 4 clips and fender apron seal.

  4. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY


    1. A0098PV

      Disconnect the sensor connector.

    2. Detach the wire harness clamp.

    3. Loosen the hose clamp and remove the resonator with air cleaner cap.

    4. A0099K2

      Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

  5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  6. REMOVE AIR CLEANER CASE ASSEMBLY


    1. A00JYCZ

      Remove the 3 bolts and air cleaner case.

  7. REMOVE VANE PUMP V BELT


    1. A009A8N

      Loosen bolt and nut, and remove the V belt.

  8. REMOVE COOLER COMPRESSOR V BELT


    1. A009B8WE03
      Text in Illustration
      *1 Adjusting Bolt

      Loosen nut and adjusting bolt, and remove the V belt.

  9. REMOVE FAN AND GENERATOR V BELT


    1. A0099F1E03
      Text in Illustration
      *1 Adjusting Bolt

      Loosen 2 bolts.

    2. Loosen adjusting bolt, and remove the V belt.