CRANKSHAFT POSITION SENSOR REMOVAL


  1. REMOVE FAN SHROUD


    1. Remove the fan shroud Click here.

  2. DISCONNECT VANE PUMP ASSEMBLY


    1. A00OACH

      Remove the bolt and disconnect the pressure feed tube.

    2. A00O71E

      Disconnect the 2 connectors.

    3. Remove the 2 bolts and disconnect the vane pump.

      Tech Tips

      It is not necessary to completely remove the vane pump. With the hoses connected to the vane pump, hang the vane pump on the vehicle body with a rope.

  3. DISCONNECT COOLER COMPRESSOR ASSEMBLY


    1. A00O4YU

      Remove the bolt and disconnect the suction hose from the engine.

    2. A00O7MQ

      Disconnect the connector.

    3. Remove the 4 bolts and disconnect the cooler compressor.

      Tech Tips

      It is not necessary to completely remove the cooler compressor. With the hoses connected to the compressor, hang the compressor on the vehicle body with a rope.

  4. REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET


    1. A00XKGME07

      Remove the 5 bolts and compressor mounting bracket.

  5. REMOVE CRANKSHAFT POSITION SENSOR


    1. A0096MR

      Disconnect the crankshaft position sensor connector and detach the wire harness clamp.

    2. A0096L4E02

      Remove the bolt and crankshaft position sensor.