DIESEL THROTTLE BODY REMOVAL


  1. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY


    1. A0098PV

      Disconnect the sensor connector.

    2. Detach the wire harness clamp.

    3. Loosen the hose clamp and remove the resonator with air cleaner cap.

    4. A0099K2

      Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

  2. REMOVE INTAKE PIPE


    1. A0095CX

      Remove the 2 bolts.

    2. Loosen the hose clamp and remove the intake pipe.

  3. REMOVE INTAKE FLANGE


    1. A00990QE01
      Text in Illustration
      *A w/o Rear Heater
      *B w/ Rear Heater

      Remove the bolt and disconnect the heater water hose.

    2. A009AT6

      Disconnect the manifold absolute pressure sensor connector.

    3. A0094FR

      Disconnect the PCV hose.

    4. Remove the 3 nuts, intake flange and gasket.

  4. REMOVE DIESEL THROTTLE BODY


    1. A0096IL

      Disconnect the throttle open switch connector.

    2. Disconnect the throttle control motor connector.

    3. Remove the diesel throttle body and gasket.