INTAKE AIR TEMPERATURE SENSOR (w/ DPF) INSTALLATION


  1. INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. Using a 22 mm ball joint lock nut wrench, install a new gasket and the intake air temperature sensor.

      Torque:
      34 N*m  { 350 kgf*cm, 25 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench Click here.

    2. Connect the intake air temperature sensor connector.

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A00K0KKE01
      Text in Illustration
      *1 No. 1 Engine Cover Hook
      *2 No. 3 Engine Cover Bracket

      Attach the 2 No. 1 engine cover hooks to the No. 3 engine cover bracket.

    2. Install the 2 nuts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }