CRANKSHAFT POSITION SENSOR (w/o DPF) REMOVAL


  1. REMOVE FRONT BUMPER LOWER COVER


    1. Remove the clip, 5 bolts and front bumper lower cover.

  2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. Remove the 4 bolts and No. 1 engine under cover.

  3. REMOVE CRANKSHAFT POSITION SENSOR


    1. A00K0LI

      Disconnect the crankshaft position sensor connector and detach the connector from the vacuum transmitting pipe.

    2. Detach the 3 clamps and remove the bolt and crankshaft position sensor.