DIESEL THROTTLE BODY (w/o DPF) REMOVAL


  1. DISCONNECT INLET HEATER WATER HOSE


    1. A00JUQI

      Remove the bolt and disconnect the inlet heater water hose.

  2. DISCONNECT NO. 4 VACUUM TRANSMITTING PIPE SUB-ASSEMBLY


    1. A00JWMM

      Remove the bolt and disconnect the No. 4 vacuum transmitting pipe.

  3. REMOVE NO. 1 INTAKE PIPE


    1. A00JZLQ

      Disconnect the 3 connectors from the intake air temperature sensor, throttle control motor and manifold absolute pressure sensor.

    2. Detach the 2 clamps.

    3. Disconnect the vacuum hose from the manifold absolute pressure sensor.

    4. A00JWSR

      Loosen the 2 hose clamps of the No. 1 air hose.

    5. A00JV3H

      Loosen the hose clamp of the intercooler air hose.

    6. A00K23L

      Remove the 2 bolts and No. 1 intake pipe.

  4. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A00JWJG

      Disconnect the throttle position sensor connector.

    2. A00K29U

      Remove the 2 bolts, 2 nuts, diesel throttle body and gasket.