ECD SYSTEM (w/o DPF) TERMINALS OF ECM
Tech Tips
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G57-23 (BATT) - C93-1 (E1) | L - BR | Battery (for measuring the battery voltage and for the ECM memory) | Always | 11 to 14 V |
| G58-24 (IGSW) - C93-1 (E1) | W - BR | Ignition switch lock cylinder assembly | Ignition switch ON | 11 to 14 V |
| G57-24 (+B) - C93-1 (E1) | W - BR | Power source of ECM | Ignition switch ON | 11 to 14 V |
| G57-17 (+B2) - C93-1 (E1) | W - BR | Power source of ECM | Ignition switch ON | 11 to 14 V |
| G58-11 (MREL) - C93-1 (E1) | V - BR | EFI relay | Ignition switch ON | 11 to 14 V |
| G58-11 (MREL) - C93-1 (E1) | V - BR | EFI relay | 10 seconds elapsed after ignition switch off | 0 to 1.5 V |
| G58-6 (VCPA) - G58-5 (EPA) | LG - P | Power source of accelerator pedal position sensor (for VPA) | Ignition switch ON | 4.5 to 5.5 V |
| G58-4 (VCP2) - G58-3 (EPA2) | R - W | Power source of accelerator pedal position sensor (for VPA2) | Ignition switch ON | 4.5 to 5.5 V |
| G57-2 (VPA) - G58-5 (EPA) | L - P | Accelerator pedal position sensor (for engine control) | Ignition switch ON, accelerator pedal fully released | 0.5 to 1.1 V |
| G57-2 (VPA) - G58-5 (EPA) | L - P | Accelerator pedal position sensor (for engine control) | Ignition switch ON, accelerator pedal fully depressed | 3.0 to 4.6 V |
| G57-1 (VPA2) - G58-3 (EPA2) | GR - W | Accelerator pedal position sensor (for sensor malfunction detection) | Ignition switch ON, accelerator pedal fully released | 0.9 to 2.3 V |
| G57-1 (VPA2) - G58-3 (EPA2) | GR - W | Accelerator pedal position sensor (for sensor malfunction detection) | Ignition switch ON, accelerator pedal fully depressed | 3.4 to 5.0 V |
| C90-17 (VG) - C90-18 (EVG) | W - B-W | Mass air flow meter | Idling, A/C switch off | 0.5 to 3.4 V |
| C90-6 (THA) - C90-12 (ETHA) | Y-B - BR | Intake air temperature sensor (built into mass air flow meter) | Idling, intake air temperature at 20°C (68°F) | 0.5 to 3.4 V |
| C90-3 (THIA) - C90-9 (ETHI) | B - BR | Intake air temperature sensor (turbo) | Idling, intake air temperature at 0 to 80°C (32 to 176°F) | 0.5 to 3.4 V |
| C90-5 (THW) - C90-11 (ETHW) | R-L - BR | Engine coolant temperature sensor | Idling, engine coolant temperature at 80°C (176°F) | 0.2 to 1.0 V |
| C90-4 (THF) - C90-10 (ETHF) | G-B - BR | Fuel temperature sensor | Ignition switch ON | 0.5 to 3.4 V |
| G57-6 (STA) - C93-1 (E1) | W - BR | Starter signal | Cranking | 6.0 V or higher |
| C90-21 (#1) - C93-1 (E1) C90-22 (#2) - C93-1 (E1) C90-23 (#3) - C93-1 (E1) C90-24 (#4) - C93-1 (E1) |
B-W - BR L - BR R-L - BR Y - BR |
Injector assembly | Idling | Pulse generation (See waveform 2) |
| C92-13 (G+) - C92-14 (G-) | G - R | Camshaft position sensor | Idling | Pulse generation (See waveform 4) |
| C92-7 (NE+) - C92-8 (NE-) | W - B | Crankshaft position sensor | Idling | Pulse generation (See waveform 4) |
| G57-8 (STP) - C93-1 (E1) | V - BR | Stop light switch assembly | Ignition switch ON, brake pedal depressed | 7.5 to 14 V |
| G57-8 (STP) - C93-1 (E1) | V - BR | Stop light switch assembly | Ignition switch ON, brake pedal released | 0 to 1.5 V |
| G57-9 (ST1-) - C93-1 (E1) | B - BR | Stop light switch assembly (opposite to STP) |
Ignition switch ON, brake pedal depressed | 0 to 1.5 V |
| G57-9 (ST1-) - C93-1 (E1) | B - BR | Stop light switch assembly (opposite to STP) |
Ignition switch ON, brake pedal released | 7.5 to 14 V |
| C91-15 (CLSW)*1 - C93-1 (E1) | B - BR | Clutch switch assembly | Ignition switch ON, clutch pedal released | 8.5 to 14 V |
| G58-23 (TC) - C93-1 (E1) | V - BR | Terminal TC of DLC3 | Ignition switch ON | 11 to 14 V |
| G57-19 (W) - C93-1 (E1) | V - BR | MIL | MIL illuminated | 0 to 3 V |
| G57-19 (W) - C93-1 (E1) | V - BR | MIL | MIL not illuminated | 11 to 14 V |
| G58-30 (SPD) - C93-1 (E1) | R - BR | Speed signal from combination meter assembly | Ignition switch ON, slowly wheel rotated | Pulse generation (See waveform 9) |
| C91-12 (VCPM) - C91-16 (EPIM) | R - B | Power source of manifold absolute pressure sensor | Ignition switch ON | 4.5 to 5.5 V |
| C91-5 (PIM) - C91-16 (EPIM) | L-B - B | Manifold absolute pressure sensor | Negative pressure of 40 kPa (300 mmHg, 11.8 in.Hg) applied | 0.1 to 0.7 V |
| C91-5 (PIM) - C91-16 (EPIM) | L-B - B | Manifold absolute pressure sensor | Same as atmospheric pressure | 0.8 to 1.5 V |
| C91-5 (PIM) - C91-16 (EPIM) | L-B - B | Manifold absolute pressure sensor | Positive pressure of 170 kPa (1275 mmHg, 50.2 in.Hg) applied | 1.6 to 2.3 V |
| G58-12 (IREL) - C93-1 (E1) | B - BR | EDU relay | Ignition switch off | 11 to 14 V |
| G58-12 (IREL) - C93-1 (E1) | B - BR | EDU relay | Idling | 0 to 1.5 V |
| G57-18 (TACH) - C93-1 (E1) | P - BR | Engine speed | Idling | Pulse generation |
| C90-14 (VCM) - C90-15 (E2M) | Y-B - GR | Power source of fuel pressure sensor (for PCR1) | Ignition switch ON | 4.5 to 5.5 V |
| C90-13 (VCS) - C90-8 (E2S) | LG - L | Power source of fuel pressure sensor (for PCR2) | Ignition switch ON | 4.5 to 5.5 V |
| C90-16 (PCR1) - C90-15 (E2M) | R - GR | Fuel pressure sensor (main) | Idling | 1.8 to 2.1 V |
| C90-2 (PCR2) - C90-8 (E2S) | Y - L | Fuel pressure sensor (sub) | Idling | 1.2 to 1.5 V |
| C91-19 (GREL) - C93-1 (E1) | R - BR | GLOW relay | Cranking | 11 to 14 V |
| C91-19 (GREL) - C93-1 (E1) | R - BR | GLOW relay | Idling | 0 to 1.5 V |
| C91-23 (ALT) - C93-1 (E1) | L - BR | Generator assembly (Alternator) duty ratio | Idling | Pulse generation |
| C92-23 (PCV+) - C92-12 (PCV-) | W - B | Suction control valve | Idling | Pulse generation (See waveform 1) |
| C90-20 (INJF) - C93-1 (E1) | BR - BR | Injector driver | Idling | Pulse generation (See waveform 3) |
| C90-19 (PRD) - C93-1 (E1) | B - BR | Pressure discharge valve drive signal | Ignition switch off | 4 to 5.5 V |
| C93-6 (M+) - C93-1 (E1) | W - BR | DC motor (turbocharger sub-assembly) | Idling | Pulse generation (See waveform 6) |
| C93-7 (M-) - C93-1 (E1) | B - BR | DC motor (turbocharger sub-assembly) | Idling | Pulse generation (See waveform 7) |
| C91-11 (VNVC) - C91-10 (VNE2) | W - L | Power source of nozzle vane position sensor | Ignition switch ON | 4.5 to 5.5 V |
| C91-6 (VTA1) - C91-10 (VNE2) | R - L | Nozzle vane position sensor | Ignition switch ON | 2.3 to 2.7 V |
| C91-8 (VCVL) - C91-9 (EVLU) | R - W | Power source of throttle position sensor | Ignition switch ON | 4.5 to 5.5 V |
| C91-3 (VLU) - C91-9 (EVLU) | LG- W | Throttle position sensor | Ignition switch ON, throttle valve fully opened |
3.6 to 4.2 V |
| C91-3 (VLU) - C91-9 (EVLU) | LG- W | Throttle position sensor | Ignition switch ON, throttle valve fully closed |
0.4 to 1.0 V |
| C92-15 (LUSL) - C93-1 (E1) | L-R - BR | Diesel throttle duty signal | Engine warmed up, racing engine | Pulse generation (See waveform 8) |
| C91-13 (VCEG) - C91-14 (EEGL) | R - BR | Power source of EGR valve position sensor | Ignition switch ON | 4.5 to 5.5 V |
| C91-4 (EGLS) - C91-14 (EEGL) | B - BR | EGR valve position sensor | Ignition switch ON | 0.6 to 1.4 V |
| C93-9 (EGR) - C93-1 (E1) | W-R - BR | Electric vacuum regulating valve assembly | Ignition switch ON | Pulse generation (See waveform 5) |
| C92-9 (EGRC) - C93-1 (E1) | P-L - BR | Vacuum switching valve (for EGR Cut) | Ignition switch ON, EGR cut (accelerator pedal fully depressed) | 0 to 1.5 V |
| C93-4 (ECBV) - C93-1 (E1) | L-Y - BR | Vacuum switching valve (for EGR bypass valve) | ON (open) Idling (engine coolant temperature 70°C (158°F) or more) |
0 to 1.5 V |
| OFF (closed) Idling (engine coolant temperature 70°C (158°F) or more) |
7.5 to 14 V | |||
| C93-2 (SCV) - C93-12 (E01) | B-W - W-B | Vacuum switching valve (for No. 1 swirl control valve) | Idling | 0 to 1.5 V |
| Engine speed 2600 rpm or more | 11 to 14 V | |||
| C93-3 (SCV2) - C93-12 (E01) | L-B - W-B | Vacuum switching valve (for No. 2 swirl control valve) | Idling | 0 to 1.5 V |
| Engine speed 2,600 rpm or more | 11 to 14 V | |||
| C92-20 (PSW) - C93-12 (E01) | G - W-B | Power steering oil pressure switch | Steering wheel turned | 0 to 3 V |
| Steering wheel not turned | 11 to 14 V | |||
| G57-10 (ACM) - C93-12 (E01) | B - W-B | Vacuum switching valve (for engine mounting) | Idling | 0 to 1.5 V |
| G58-10 (AC1) - C93-12 (E01) | LG - W-B | A/C signal | A/C switch on | 0 to 1.5 V |
| A/C switch off | 11 to 14 V | |||
| G58-13 (ACT) - C93-12 (E01) | R - W-B | A/C signal | Ignition switch ON | 11 to 14 V |
| A/C cut control on | 0 to 3 V | |||
| G57-7 (FC) - C93-12 (E01) | G - W-B | Sub pump relay | Relay on | 0 to 1.5 V |
| Relay off | 7.5 to 14 V | |||
| C92-26 (NSW)*2 - C93-12 (E01) | B - W-B | Park/neutral position switch assembly | Ignition switch ON, shift lever in P or N | Below 3 V |
| Ignition switch ON, shift lever not in P and N | 11 to 14 V | |||
| C91-5 (D)*2 - C93-12 (E01) | G - W-B | Park/neutral position switch assembly | Ignition switch ON, shift lever in D | 11 to 14 V |
| Ignition switch ON, shift lever not in D | Below 1 V | |||
| G57-22 (FAN) - C93-12 (E01) | GR - W-B | FAN relay | Ignition switch ON | 11 to 14 V |
| Idling with A/C on or High engine coolant temperature | Below 1.5 V | |||
| G58-36 (CANL) - C93-1 (E1) | W - BR | CAN communication line | Ignition switch ON | Pulse generation (See waveform 10) |
| G58-35 (CANH) - C93-1 (E1) | R - BR | CAN communication line | Ignition switch ON | Pulse generation (See waveform 11) |
| G57-21 (CANN) - C93-1 (E1) | GR - BR | CAN communication line | Ignition switch ON | Pulse generation (See waveform 10) |
| G57-20 (CANP) - C93-1 (E1) | BR - BR | CAN communication line | Ignition switch ON | Pulse generation (See waveform 11) |
Tech Tips
-
*1: for Manual Transaxle
-
*2: for Automatic Transaxle
-
WAVEFORM 1
Suction Control Valve Signal Item Content Terminal No. (Symbol) C92-23 (PCV+) - C92-12 (PCV-) Tool Setting 10 V/DIV., 5 msec./DIV. Condition Idling or cranking with warm engine Tech Tips
The waveform varies depending on suction control valve operation.
-
WAVEFORM 2
Injector No. 1 (to No. 4) Injection Signal Item Content Terminal No. (Symbol) (a) C90-21 (#1) - C93-1 (E1)
(b) C90-22 (#2) - C93-1 (E1)
(c) C90-23 (#3) - C93-1 (E1)
(d) C90-24 (#4) - C93-1 (E1)
Tool Setting 5 V/DIV., 20 msec./DIV. Condition Idling with warm engine Tech Tips
The waveform varies depending on the injector injection.
-
WAVEFORM 3
Injector Injection Confirmation Signal Item Content Terminal No. (Symbol) C90-20 (INJF) - C93-1 (E1) Tool Setting 2 V/DIV., 20 msec./DIV. Condition Idling with warm engine Tech Tips
The waveform varies depending on the injector injection.
-
WAVEFORM 4
Crankshaft Position Sensor Signal and Camshaft Position Sensor Signal Item Content Terminal No. (Symbol) (a) C92-7 (NE+) - C92-8 (NE-)
(b) C92-13 (G+) - C92-14 (G-)
Tool Setting 5 V/DIV., 20 msec./DIV. Condition Idling with warm engine Tech Tips
The waveform varies depending on the engine speed.
-
WAVEFORM 5
E-VRV for EGR Signal Item Content Terminal No. (Symbol) C93-9 (EGR) - C93-1 (E1) Tool Setting 5 V/DIV., 1 msec./DIV. Condition Idling with warm engine Tech Tips
The waveform changes depending on electric vacuum regulating valve assembly operation.
-
WAVEFORM 6
DC Motor Positive Terminal Item Content Terminal No. (Symbol) C93-6 (M+) - C93-1 (E1) Tool Setting 5 V/DIV., 20 msec./DIV. Condition Idling with warm engine Tech Tips
The waveform varies depending on turbocharger operation.
-
WAVEFORM 7
DC Motor Negative Terminal Item Content Terminal No. (Symbol) C93-7 (M-) - C93-1 (E1) Tool Setting 5 V/DIV., 50 msec./DIV. Condition Idling with warm engine Tech Tips
The waveform varies depending on the turbocharger status.
-
WAVEFORM 8
Diesel Throttle Signal Item Content Terminal No. (Symbol) C92-15 (LUSL) - C93-1 (E1) Tool Setting 1 V/DIV., 2 msec./DIV. Condition Racing with warm engine Tech Tips
The waveform varies depending on throttle valve operation.
-
WAVEFORM 9
Vehicle Speed Signal Item Content Terminal No. (Symbol) G58-30 (SPD) - C93-1 (E1) Tool Setting 5 V/DIV., 10 msec./DIV. Condition Driving at vehicle speed of 40 km/h (25 mph) Tech Tips
The wavelength becomes shorter as the vehicle speed increases.
-
WAVEFORM 10
CAN Communication Signal Item Content Terminal No. (Symbol) G58-36 (CANL) - C93-1 (E1)
G57-21 (CANN) - C93-1 (E1)
Tool Setting 1 V/DIV., 10 msec./DIV. Condition Engine stopped, ignition switch ON Tech Tips
The waveform varies depending on the CAN communication signal.
-
WAVEFORM 11
CAN Communication Signal Item Content Terminal No. (Symbol) G58-35 (CANH) - C93-1 (E1)
G57-20 (CANP) - C93-1 (E1)
Tool Setting 1 V/DIV., 10 msec./DIV. Condition Engine stopped, ignition switch ON Tech Tips
The waveform varies depending on the CAN communication signal.