ENGINE COOLANT TEMPERATURE SENSOR INSPECTION


  1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR

    A0097GTE03
    Text in Illustration
    *1 Resistance *2 Temperature
    *3 Acceptable - -

    1. Partially immerse the sensor in water and warm up the water.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Approx. 20°C (68°F) 2.32 to 2.59 kΩ
      Approx. 80°C (176°F) 0.310 to 0.326 kΩ

      If the result is not as specified, replace the sensor.

      Note

      When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.