SUSPENSION CONTROL SERVICE DATA

Suspension Control System
Height difference of left and right sides	20 mm (0.787 in.) or less
Fluid temperature is 20°C (68°F)	2.6 to 3 MPa (26.6 to 30.5 kgf/cm², 377 to 435 psi)

Height Control Compressor
Tester Connection	Condition	Specified Condition
2 (L) - 1 (B)	15 to 25°C (59 to 77°F)	10 to 14 Ω

Control Valve Assembly
Tester Connection	Condition	Specified Condition
1 (LH+) - 2 (E)	15 to 25°C (59 to 77°F)	10 to 14 Ω
3 (RH+) - 2 (E)	15 to 25°C (59 to 77°F)	10 to 14 Ω

Height Control Sensor
Tester Connection	Condition	Specified Condition
3 (SHG) - 2 (SHRR) 3 (SHG) - 2 (SHRL)	High (45°)	4.4 to 4.6 V
	Normal (0°)	2.3 to 2.6 V
	Low (-45°)	0.4 to 0.6 V

Front Acceleration Sensor
Tester Connection	Condition	Specified Condition
1 (SGFR) - 2 (SGR)	Sensor stationary	Approx. 2.0 to 2.5 V
1 (SGFR) - 2 (SGR)	Sensor tilted	Changes between approx. 0.9 and 2.3 V

Rear Acceleration Sensor
Tester Connection	Condition	Specified Condition
1 (SGRR) - 2 (SGND)	Sensor stationary	Approx. 2.0 to 2.5 V
1 (SGRR) - 2 (SGND)	Sensor tilted	Changes between approx. 0.9 and 2.3 V

Absorber Control Actuator
Tester Connection	Condition	Specified Condition
1 (FAL+) - 2 (FAL-)	Always	6.4 to 7.2 V
3 (FBL+) - 4 (FBL-)
1 (FAR+) - 2 (FAR-)
3 (FBR+) - 4 (FBR-)