ATF TEMPERATURE SENSOR INSPECTION


  1. INSPECT NO. 2 ATF TEMPERATURE SENSOR

    A0095H6E01
    Text in Illustration
    *a

    Component without harness connected

    (No. 2 ATF Temperature Sensor)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 79 Ω to 156 kΩ
      1 - Body ground Always 10 kΩ or higher
      2 - Body ground Always 10 kΩ or higher

      Tech Tips

      If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

      Standard Resistance
      ATF Temperature Specified Condition
      20°C (68°F) 10.3 to 13.9 kΩ
      120°C (248°F) 0.58 to 0.65 kΩ

      If the result is not as specified, replace the No. 2 ATF temperature sensor.