DRIVING SUPPORT ECU INSTALLATION

Note

Do not twist the connectors of the driving support ECU when connecting them.
Do not apply more force than necessary to the connectors. If more than 98 N (10 kgf, 22 lbf) of force is applied to a connector, the connector or connector holder may be damaged.

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.

INSTALL DRIVING SUPPORT ECU ASSEMBLY
1. Attach the claw to install the driving support ECU assembly.
  
  Note
  
  When a new ECU is installed, perform initialization Click here.
INSTALL ECU INTEGRATION BOX RH
1. Install the ECU integration box RH with the 2 nuts and bolt.
2. Attach the clamp.
3. Connect the connectors.
INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY
1. Attach the 2 claws to install the No. 2 air duct sub-assembly.
2. Install the screw.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Text in Illustration

*1 Bolt

*2 Screw
1. Connect each connector.
2. Attach the 5 clips and claw to install the glove compartment door.
3. Install the 2 bolts <C> and 2 screws <A> or <B>.
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
1. Attach the 3 clips and 2 guides to install the No. 2 instrument panel under cover.
2. Install the screw.
  
  Text in Illustration
  
  *A for LHD *B for RHD
INSTALL INSTRUMENT PANEL ORNAMENT
1. Attach the 5 clips to install the instrument panel ornament.
INSTALL INSTRUMENT SIDE PANEL RH
1. Connect the connector.
2. Attach the 5 clips, claw and 3 guides to install the instrument side panel.
INSTALL COWL SIDE TRIM BOARD RH
1. Attach the clip and claw to install the cowl side trim board.
2. Install the clip.
INSTALL DOOR SCUFF PLATE ASSEMBLY RH
1. Attach the 4 clips, 10 claws and 2 guides to install the door scuff plate.

Text in Illustration
*1	Bolt
*2	Screw