DRIVING SUPPORT ECU REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

    A00XKMME01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the door scuff plate.

    2. Using a screwdriver, detach the 4 clips, 10 claws and 2 guides and remove the door scuff plate.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE COWL SIDE TRIM BOARD RH

    A00XJDF

    1. Remove the clip.

    2. Detach the clip and claw and remove the cowl side trim board.

  3. REMOVE INSTRUMENT SIDE PANEL RH

    A00XGN2E01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument side panel.

    2. Using a moulding remover, detach the 5 clips, claw, and 3 guides.

    3. Disconnect the connector and remove the instrument side panel.

  4. REMOVE INSTRUMENT PANEL ORNAMENT

    A00XGFYE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel ornament.

    2. Using a moulding remover, detach the 5 clips and remove the instrument panel ornament.

  5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Remove the screw.

    2. Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover.

      A00OAYQE01
      Text in Illustration
      *A for LHD *B for RHD

  6. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A00XDSKE01
    Text in Illustration
    *1 Bolt
    *2 Screw

    1. Remove the 2 bolts <C> and 2 screws <A> or <B>.

    2. Detach the 5 clips and claw.

    3. Disconnect each connector and remove the glove compartment door.

  7. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY


    1. A00O3YC

      Remove the screw.

    2. Detach the 2 claws and remove the No. 2 air duct sub-assembly.

  8. REMOVE ECU INTEGRATION BOX RH

    A00JU63

    1. Disconnect the connectors.

    2. Detach the clamp.

    3. Remove the 2 nuts, bolt and ECU integration box RH.

  9. REMOVE DRIVING SUPPORT ECU ASSEMBLY

    A00XF2V

    1. Detach the claw and remove the driving support ECU assembly.