IGNITION SWITCH REMOVAL

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE LOWER STEERING COLUMN COVER


    1. Remove the 2 screws.

      Tech Tips

      Turn the steering wheel to the right and left as necessary to remove the 2 screws.

    2. A009AHF

      Detach the 2 claws and remove the lower steering column cover.

  2. REMOVE IGNITION SWITCH ASSEMBLY


    1. A0096Y1

      for Manual Transmission:


      1. Disconnect the ignition switch connector and detach the wire harness clamp.

      2. Remove the 2 screws and ignition switch.

    2. A0095WT

      for Automatic Transmission:


      1. Disconnect the ignition switch connector and key interlock solenoid connector and detach the wire harness clamp.

      2. Remove the 2 screws and ignition switch.

      3. Detach the claw and disconnect the key interlock solenoid wire harness from the ignition switch.