GLOW PLUG CONTROLLER (w/ DPF) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT WHEEL LH

  3. REMOVE FRONT FENDER MUDGUARD LH

    A009B85

    1. Remove the 2 clips and 4 screws.

    2. Remove the front fender mudguard.

  4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    A00O74WE01

    1. Remove the 2 screws and bolt from the front fender splash shield sub-assembly.

      Text in Illustration
      *1 Bolt
      *2 Screw
    2. A00O6EP

      Remove the 12 grommets and front fender splash shield sub-assembly.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

  5. REMOVE GLOW PLUG CONTROLLER

    A00OAPQ

    1. Disconnect the 4 connectors and clamp.

    2. Remove the 2 nuts and glow plug controller from the vehicle.

  6. REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET


    1. Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.

  7. REMOVE NO. 2 GLOW PLUG CONTROLLER BRACKET


    1. Remove the 2 screws and No. 2 glow plug controller bracket from the glow plug controller.