ENGINE SWITCH (for LHD) INSTALLATION


  1. INSTALL ENGINE SWITCH


    1. Attach the 2 claws to install the engine switch.

    2. Connect the connector.

  2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Display)


    1. Attach the 3 clips and guide to install the lower center instrument cluster finish panel.

    2. Install the 2 bolts <E>.

  3. INSTALL RADIO RECEIVER ASSEMBLY (w/ Display)


    1. for Upper Side:

      Install the radio receiver assembly Click here.

    2. for Lower Side:

      Install the radio receiver assembly Click here.

  4. INSTALL FRONT CONSOLE UPPER PANEL GARNISH


    1. Attach the 5 clips to install the front console upper panel garnish.

  5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    A0095V3

    1. Connect the connector.

    2. Attach the 4 clips to install the integration control and panel assembly.

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. Connect the connector.

    2. Attach the 4 clips to install the instrument panel finish panel end.

  7. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips to install the instrument panel finish panel end.

  9. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. Attach the 5 clips to install the No. 2 instrument panel finish panel cushion.