OIL PRESSURE SWITCH REMOVAL


  1. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY


    1. A0098PV

      Disconnect the sensor connector.

    2. Detach the wire harness clamp.

    3. Loosen the hose clamp and remove the resonator with air cleaner cap.

    4. A0099K2

      Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

  2. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the dipstick.

    2. A00JWDK

      Remove the 2 bolts and dipstick guide.

    3. Remove the O-ring from the dipstick guide.

  3. REMOVE VACUUM PUMP OIL INLET HOSE


    1. A00JWVQ

      Remove the union bolt and gasket, and then disconnect the vacuum pump oil inlet hose from the cylinder block.

  4. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A009AG5

      Using a 24 mm deep socket wrench, remove the oil pressure switch.