OIL LEVEL SENSOR REMOVAL


  1. REMOVE FRONT BUMPER COVER LOWER


    1. Remove the clip, 5 bolts and front bumper cover lower.

  2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. Remove the 4 bolts.

    2. A00JXIF

      Unhook the engine under cover from the vehicle body as shown in the illustration.

  3. REMOVE REAR ENGINE UNDER COVER ASSEMBLY


    1. Remove the 4 bolts and rear engine under cover.

  4. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and drain the engine oil into a container.

    3. Install a new gasket and the oil pan drain plug.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  5. REMOVE ENGINE OIL LEVEL SENSOR


    1. Disconnect the connector.

    2. A009AFP

      Remove the 4 bolts and sensor.

    3. Cut away part of the gasket and remove the gasket from the engine oil level sensor.

      Tech Tips

      Remove only the outer part of the gasket.