WATER PUMP ON-VEHICLE INSPECTION


  1. REMOVE FAN SHROUD


    1. Remove the fan shroud Click here.

  2. INSPECT WATER PUMP ASSEMBLY


    1. A00975BE02
      Text in Illustration
      *1 Water Hole
      *2 Air Hole

      Visually check the air hole and water hole for coolant leakage.

      If leakage is found, replace the water pump assembly.

    2. Turn the pulley and check that the water pump bearing moves smoothly and quietly.

      If necessary, replace the water pump assembly.

  3. INSPECT FLUID COUPLING ASSEMBLY


    1. A0098N8

      Remove the 4 nuts and fan.

    2. A0097V5

      Check the fluid coupling for damage or silicon oil leaks.

      If necessary, replace the fluid coupling.

    3. Install the fan with the 4 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  4. INSTALL FAN SHROUD


    1. Install the fan shroud Click here.