EXHAUST PIPE REMOVAL


  1. REMOVE TAILPIPE ASSEMBLY


    1. Remove the 2 bolts and disconnect the tailpipe from the exhaust pipe support.

    2. Remove the gasket and exhaust pipe support.

  2. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. Remove the 2 bolts and 2 compression springs, and then disconnect the center exhaust pipe from the 3 exhaust pipe supports.

    2. Remove the gasket.

  3. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. Disconnect the heated oxygen sensor connector.

    2. Remove the 2 nuts and front exhaust pipe.

    3. Remove the gasket.

  4. REMOVE EXHAUST PIPE STOPPER BRACKET


    1. Remove the 2 bolts and stopper bracket.

  5. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY


    1. Disconnect the heated oxygen sensor connector.

    2. Remove the 2 nuts and front exhaust pipe.

    3. Remove the gasket.

  6. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. Disconnect the sensor connector.

    2. A00JVL6E01

      Using SST, remove the sensor.

      SST
      09224-00010

  7. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    1. A00JWC2E01

      Using SST, remove the sensor.

      SST
      09224-00010