PCV VALVE INSTALLATION


  1. INSTALL PCV VALVE SUB-ASSEMBLY


    1. Apply adhesive to 2 or 3 threads of the valve.

      Adhesive
      Toyota genuine adhesive 1324, three bond 1324 or equivalent

    2. Using a 22 mm ball joint lock nut wrench, install the PCV valve.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench Click here.

    3. Connect the PCV hose.