REAR BUMPER DISASSEMBLY

  1. REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System)

    1. Disengage the 4 clamps.

      A011TXX

    2. Disconnect the connector and remove the No. 2 luggage room wire.

  2. REMOVE ULTRASONIC SENSOR CLIP (w/ Intuitive Parking Assist System)

    1. Disconnect the connector.

      A011V07E01
      Text in Illustration
      *A LH Side
      *B Other Side

    2. Disengage the clamp.

    3. Disengage the 4 claws to remove the ultrasonic sensor clip.

      A011RTFE01
      Text in Illustration
      *A LH Side
      *B Other Side

  3. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

    1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

      A011THYE01
      Text in Illustration
      *A LH Side
      *B Other Side

  4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

    1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.

      A011TMDE01
      Text in Illustration
      *A LH Side
      *B Other Side

  5. REMOVE REAR BUMPER SIDE RETAINER LH

    1. Remove the 3 screws.

      A011SJD

    2. Disengage the 6 claws and remove the rear bumper side retainer LH.

  6. REMOVE REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. REMOVE WHEEL HOUSE REINFORCEMENT LH

    1. Disengage the clip.

    2. Remove the screw.

      A011TKC

    3. Remove the nut and wheel house reinforcement LH.

  8. REMOVE WHEEL HOUSE REINFORCEMENT RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. REMOVE REAR BUMPER ENERGY ABSORBER

    1. Disengage the 2 guides and remove the rear bumper energy absorber.

      A011TZK

  10. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

    1. Remove the 6 nuts and rear bumper reinforcement sub-assembly.

      A011RRG