REAR BUMPER REMOVAL

  1. REMOVE REAR BUMPER PLATE LH

    1. Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

      A011ULYE01
      Text in Illustration
      *1 Protective Tape
      *2 Hook

      Tech Tips

      Tape the screwdriver tip before use.

    2. Disengage the hook and remove the rear bumper plate LH.

  2. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY

    1. Put protective tape around the rear bumper assembly.

      A011RFJE01
      Text in Illustration
      *1 Protective Tape

    2. Using a clip remover, remove the 2 clips.

      A011S5O

    3. Remove the 6 screws.

    4. Remove the 2 screws.

      A011SXC

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Disengage the 7 claws as shown in the illustration.

      A011QRB

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. Disengage the 6 claws as shown in the illustration.

      A011V5R

    7. w/ Intuitive Parking Assist System:

      1. Disconnect the connector.

    8. Remove the rear bumper assembly.