REAR COMBINATION LIGHT ASSEMBLY REMOVAL

Tech Tips

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE SPARE WHEEL COVER ASSEMBLY

    1. Remove the spare wheel cover assembly.

  3. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)

    1. Remove the baggage holder net.

  4. REMOVE REAR FLOOR FINISH PLATE

    1. Remove the 5 clips.

      A011SS8

    2. Disengage the 4 clips and remove the rear floor finish plate.

      A011R0B

  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    1. Push the pin and remove the No. 1 luggage compartment trim hook.

      A011RV9E01
      Text in Illustration
      *1 Pin

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER

    1. Remove the clip <A>.

      A011R32E01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

    2. Remove the 2 clips <B>.

    3. Disengage the fastener and remove the luggage compartment inner trim cover LH.

      A011RSV

  7. REMOVE REAR COMBINATION LIGHT ASSEMBLY

    1. Disconnect each connector.

      A011QZM

    2. Disengage the clamp.

    3. Remove the 4 nuts and rear combination light assembly.

      A011R5I