MANUAL HEADLIGHT BEAM LEVEL CONTROL SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips

Use the following procedure to troubleshoot the manual headlight beam level control system.

  1. VEHICLE BROUGHT TO WORKSHOP

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK

    NEXT

  3. INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage with the ignition switch off.

      Standard Voltage
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

      NEXT

  4. PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table Click here.

      NEXT

  5. ADJUST, REPAIR OR REPLACE

    NEXT

  6. CONFIRMATION TEST

    NEXT
    END