HEADLIGHT LEVELING SWITCH REMOVAL

  1. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    1. Disconnect the front door opening trim weatherstrip LH.

      A011QQ1

  2. REMOVE INSTRUMENT SIDE PANEL LH

    1. Using a moulding remover, disengage the 4 claws as shown in the illustration.

      A011RS3

    2. Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.

      A011TVI

  3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    1. Disengage the 3 clips to remove the No. 1 instrument cluster finish panel garnish as shown in the illustration.

      A011QO5

  4. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

    1. Apply protective tape to the area shown in the illustration.

      A011RHGE01
      Text in Illustration
      *1 Protective Tape

    2. Disengage the 2 clips as shown in the illustration.

      A011RH9

    3. Using a moulding remover, disengage the 2 clips to remove the No. 1 instrument panel register assembly.

      A011S1A

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    1. Operate the tilt and telescopic lever to fully extend and lower the steering column assembly.

    2. Using a moulding remover, disengage the 2 claws, 4 clips and 2 guides.

      A011VC0

    3. Disengage the 5 claws, 5 clips and 2 guides.

      A011RQU

    4. Disconnect each connector.

    5. Remove the instrument cluster finish panel assembly as shown in the illustration.

      A011V6T

  6. REMOVE HEADLIGHT LEVELING SWITCH

    1. Disengage the 2 claws and remove the headlight leveling switch.

      A011TAI