WASHER LEVEL WARNING SWITCH REMOVAL

  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT FENDER LINER RH

    1. Remove the clip.

      A011SAZ

    2. Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

      A011QM4E01
      Text in Illustration
      *a 90°

    3. Remove the 5 screws.

      A011V6EE01

    4. Remove the 4 clips, 2 grommets and front fender liner RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

      Text in Illustration
      *1 Grommet

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    1. Remove the 3 screws and front wheel opening extension pad RH.

      A011UQX

  4. DRAIN WASHER FLUID

    1. Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      A011TQG

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE LEVEL WARNING SWITCH ASSEMBLY

    1. Disconnect the connector.

      A011REA

    2. Remove the level warning switch assembly as shown in the illustration.