WASHER NOZZLE ON-VEHICLE INSPECTION

INSPECT WASHER NOZZLE SUB-ASSEMBLY

1. With the engine running, check the position that the washer fluid hits the windshield.

   Standard
   Washer fluid hits the windshield in the areas shown in the illustration.

   

   Standard Clearance

   Area	Measurement	Area	Measurement
   A	300.0 mm (11.8 in.)	B	145.0 mm (5.71 in.)
   C	170.0 mm (6.69 in.)	-	-

   Text in Illustration

   *a	Upper Limit	*b	Standard
   *c	Lower Limit	-	-

   Tech Tips

   If the result is not as specified, replace the washer nozzle sub-assembly.