OUTER REAR VIEW MIRROR REASSEMBLY

Tech Tips

  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

  1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY (w/ Retract Mirror)

    1. Connect the connector.

    2. Engage the 2 claws to install the side turn signal light assembly.

  2. INSTALL OUTER MIRROR COVER (w/o Retract Mirror)

    1. Engage the 8 claws to install the outer mirror cover.

  3. INSTALL OUTER MIRROR COVER (w/ Retract Mirror)

    1. Engage the 7 claws to install the outer mirror cover.

    2. Connect the 2 connectors.

    3. Engage the clamp.

    4. Install the mirror actuator with the 3 screws.

      Torque:
      1.1 N*m  { 11 kgf*cm, 10 in.*lbf }

  4. INSTALL OUTER REAR VIEW MIRROR (w/o Retract Mirror)

    1. w/ Mirror Heater:

      1. Connect the 2 connectors.

    2. w/ Mirror Heater and Blind Spot Monitor System:

      1. Connect the 3 connectors.

      2. Engage the 2 claws.

    3. Engage the 2 guides on the lower part of the outer mirror to the outer rear view mirror.

      A011UFH

    4. Engage the 2 claws on the upper part of the outer mirror to the outer rear view mirror.

      A011QMJ

  5. INSTALL OUTER REAR VIEW MIRROR (w/ Retract Mirror)

    1. Connect the 2 connectors.

    2. Engage the 2 guides on the upper part of the outer mirror to the outer rear view mirror.

      A011UO6

    3. Engage the 2 claws on the lower part of the outer mirror to the outer rear view mirror.

      A011RUP