HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

  1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

    Click here

  2. REMOVE FRONT WHEEL LH

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  4. REMOVE FRONT FENDER LINER LH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  5. REMOVE FRONT DOOR SCUFF PLATE LH

    1. Disengage the 10 claws and remove the front door scuff plate LH.

      A011RIY

  6. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

    1. Remove the clip.

      A011S09

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  7. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    1. Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.

      A011QOV

  8. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    1. Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

      A011QZU

  9. REMOVE HOOD LOCK ASSEMBLY

    1. w/ Engine Hood Courtesy Switch:

      1. Disconnect the connector.

        A011R8X

    2. Remove the 3 bolts.

      A011V6F

    3. Disconnect the hood lock control cable assembly and remove the hood lock assembly.

      A011S8A

  10. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

    1. Using a screwdriver, disengage 5 clamps and hood cable grommet as shown in the illustration.

      A011T8JE01
      Text in Illustration
      *1 Hood Lock Control Cable *2 Hood Cable Grommet
      *3 Washer Hose *4 Hood Lock Control Cable Clamp

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.