SLIDING ROOF SYSTEM TERMINALS OF ECU

  1. CHECK SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY)

    1. Disconnect the S4 sliding roof ECU (sliding roof drive gear sub-assembly) connector.

      A011TGAE01

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Tech Tips

      Measure the values on the wire harness side with the connector disconnected.

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      S4-8 (B) - S4-12 (E) B - W-B Battery power supply Always 11 to 14 V
      S4-1 (IG) - S4-12 (E) GR - W-B IG power supply Ignition switch off Below 1 V
      S4-1 (IG) - S4-12 (E) GR - W-B IG power supply Ignition switch ON 11 to 14 V
      S4-12 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

      If the result is not as specified, there may be a malfunction in the wire harness.

    3. Reconnect the S4 sliding roof ECU (sliding roof drive gear sub-assembly) connector.

    4. Measure the voltage according to the value(s) in the table below.

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      S4-7 (OPN) - S4-12 (E) B - W-B Sliding roof motor open Ignition switch ON, OPEN switch on Below 1 V
      S4-7 (OPN) - S4-12 (E) B - W-B Sliding roof motor open Ignition switch ON, OPEN switch off 11 to 14 V
      S4-5 (CLS) - S4-12 (E) G - W-B Sliding roof motor close Ignition switch ON, CLOSE switch on Below 1 V
      S4-5 (CLS) - S4-12 (E) G - W-B Sliding roof motor close Ignition switch ON, CLOSE switch off 11 to 14 V
      S4-4 (UP) - S4-12 (E) R - W-B Sliding roof motor up Ignition switch ON, UP switch on Below 1 V
      S4-4 (UP) - S4-12 (E) R - W-B Sliding roof motor up Ignition switch ON, UP switch off 11 to 14 V
      S4-6 (DWN) - S4-12 (E) L - W-B Sliding roof motor down Ignition switch ON, DOWN switch on Below 1 V
      S4-6 (DWN) - S4-12 (E) L - W-B Sliding roof motor down Ignition switch ON, DOWN switch off 11 to 14 V

      If the result is not as specified, the sliding roof ECU (sliding roof drive gear sub-assembly) may be malfunctioning.