LUGGAGE COMPARTMENT DOOR REASSEMBLY

INSTALL REAR LIGHT ASSEMBLY LH

1. Install the rear light assembly with the 3 nuts.

   

   Torque:

   Nut (A)

   4.1 N*m  { 42 kgf*cm, 36 in.*lbf }

   Nut (B)

   3.6 N*m  { 37 kgf*cm, 32 in.*lbf }

2. Connect the connector.

INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

1. Engage the 2 claws to install the license plate light assembly.

2. Connect the connector.

INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor)

1. Engage the 2 claws to install the rear television camera assembly.

2. Connect the connector.

INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

1. Install 6 new gaskets to the luggage compartment door outside garnish sub-assembly.

2. Install new clip (back door outside garnish clip) and 2 new clips to the luggage compartment door outside garnish sub-assembly.

3. Engage the 3 clips to install the luggage compartment door outside garnish sub-assembly.

   

4. w/ Wireless Door Lock Control System:

   1. Install the 6 nuts.

5. w/o Wireless Door Lock Control System:

   1. Install the 4 nuts.

6. w/ Smart Key System:

   1. Connect the connector.

INSTALL REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

1. When replacing the rear spoiler with a new one:

   1. Install the 2 stud bolts to the rear spoiler.

2. Install 2 new gaskets to the rear spoiler.

3. Install 4 new clips to the rear spoiler.

4. Clean the rear spoiler.

   1. Remove any double-sided tape from the rear spoiler.

   2. Wipe off any tape adhesive residue with cleaner.

5. Install a new No. 2 rear spoiler protector.

   1. Remove the release paper from the No. 2 rear spoiler protector.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   2. Install a new No. 2 rear spoiler protector.

      Tech Tips

      Use the same procedure for the RH side and LH side.

6. Install the No. 1 rear spoiler protector.

   1. Remove the release paper from the No. 1 rear spoiler protector.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   2. Install the No. 1 rear spoiler protector as shown in the illustration.

      

      Standard Measurement

      Dimension	Measurement	Dimension	Measurement
      A	5.0 mm (0.197 in.)	B	5.0 mm (0.197 in.)

7. Clean the vehicle body surface.

   1. Using a heat light, heat the vehicle body surface.

   2. Remove the double-sided tape from the vehicle body.

   3. Wipe off any tape adhesive residue with cleaner.

8. Install the rear spoiler sub-assembly.

   1. Using a heat light, heat the vehicle body and rear spoiler sub-assembly.

   2. Remove the release paper from the rear spoiler sub-assembly.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   3. Engage the 4 clips.

      

   4. Install the rear spoiler sub-assembly with the 2 nuts.

INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/ Wireless Door Lock Control System)

1. Apply MP grease to the sliding parts of the luggage compartment door lock assembly.

2. Engage the luggage door lock control cable sub-assembly.

3. Engage the claw as shown in the illustration.

   

4. Install the luggage compartment door lock assembly with the 2 bolts.

   Torque:

   5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

5. Connect the connector.

INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/o Wireless Door Lock Control System)

1. Apply MP grease to the sliding parts of the luggage compartment door lock assembly.

2. Install the luggage compartment door lock assembly with the 2 bolts.

   Torque:

   5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

3. Connect the connector.

4. Connect the luggage door lock control cable sub-assembly.