ROOF HEADLINING DISASSEMBLY

  1. REMOVE VANITY LIGHT ASSEMBLY (w/ Sliding Roof)

    1. Remove the vanity light assembly Click here.

      Tech Tips

      Use the same procedure for the other vanity light.

  2. REMOVE NO. 4 ROOF SILENCER PAD (w/o Sliding Roof)

    1. Remove the 3 No. 4 roof silencer pads.

      A011SMW

  3. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

    1. Peel back the tape used to secure the antenna cord only to the extent that allows removal of the No. 2 antenna cord sub-assembly.

      Tech Tips

      Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

    2. Remove the No. 2 antenna cord sub-assembly from the roof headlining.

      A011QLLE01
      Text in Illustration
      *A w/o Sliding Roof *B w/ Sliding Roof
      *1 Tape - -
      *a Front - -

  4. REMOVE NO. 1 ROOF WIRE

    1. Remove the adhesive tape from the roof headlining assembly.

      A011TA6E01
      Text in Illustration
      *A w/o Sliding Roof *B w/ Sliding Roof
      *C w/o EC Mirror *D w/ EC Mirror
      *1 Adhesive Tape - -

    2. w/ Sliding Roof:

      1. Turn the visor connectors counterclockwise approximately 45° and separate the connectors from the roof headlining assembly.

    3. Remove the No. 1 roof wire from the roof headlining assembly.

      A011V7LE01
      Text in Illustration
      *A w/o Sliding Roof *B w/ Sliding Roof

  5. REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)

    1. Remove the No. 2 roof silencer pad.

      A011U9H