FRONT CONSOLE BOX DISASSEMBLY

  1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY

    1. Disengage the 4 claws and 4 clips to remove the console rear end panel sub-assembly.

      A011RZ6

  2. REMOVE REAR CONSOLE ARMREST ASSEMBLY

    1. Using a screwdriver, remove the 2 E-rings.

      A011V2V

      Note

      Be careful not to allow the E-rings to pop out when removing them.

    2. Using a screwdriver, pull out the 2 box door hinge shafts.

      A011RZJ

      Tech Tips

      • Tape the screwdriver tip before use.

      • The illustration is for the LH side.

      • Use the same procedure for the RH side and LH side.

    3. Remove the rear console armrest assembly.

  3. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY

    1. Remove the 2 screws.

      A011UBS

    2. Using a screwdriver, disengage the 8 claws.

      A011QO8

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disengage the 2 guides to remove the console compartment door lock sub-assembly as shown in the illustration.

      A011RR4

  4. REMOVE CONSOLE COMPARTMENT DOOR CUSHION

    1. Remove the 4 console compartment door cushions from the console compartment door lock sub-assembly.

      A011UCL