INSTRUMENT PANEL SAFETY PAD DISASSEMBLY

  1. REMOVE NO. 1 INSTRUMENT PANEL PIN

    1. Remove the 4 screws <C> or <D> and 4 No. 1 instrument panel pins.

      A011T0Q

  2. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    CAUTION:

    When storing the instrument panel passenger airbag assembly, keep the airbag deployment side facing upward.

    1. Remove the 2 screws.

      A011R7I

    2. Lean the instrument panel safety pad assembly and disengage the 3 hooks.

      A011RWB

    3. Disengage the 3 hooks to remove the instrument panel passenger airbag assembly from the instrument panel safety pad assembly.

      A011TYG

  3. REMOVE NO. 1 HEATER TO REGISTER DUCT

    1. Remove the clip.

      A011QWW

    2. Remove the 3 screws <C> or <D> and No. 1 heater to register duct.

  4. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

    1. Remove the screw <C> or <D>.

      A011SZT

    2. Disengage the 2 claws to remove the No. 1 side defroster nozzle duct.

  5. REMOVE NO. 3 HEATER TO REGISTER DUCT

    1. Remove the clip.

      A011S1H

    2. Remove the 3 screws <C> or <D> and No. 3 heater to register duct.

  6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

    1. Remove the screw <C> or <D>.

      A011SNX

    2. Disengage the 2 claws to remove the No. 2 side defroster nozzle duct.

  7. REMOVE ANTENNA CORD SUB-ASSEMBLY

    1. Disengage the 8 clamps and remove the antenna cord sub-assembly.

      A011UI5

  8. REMOVE DEFROSTER NOZZLE ASSEMBLY

    1. Remove the 3 screws <C> or <D>.

      A011QMM

    2. Disengage the 2 guides to remove the defroster nozzle assembly.

  9. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

    1. Remove the 2 screws.

      A011RLN

    2. Disengage the 2 clamps and remove the navigation antenna assembly.

  10. REMOVE NO. 2 HEATER TO REGISTER DUCT

    1. Remove the 2 screws <C> or <D> and No. 2 heater to register duct.

      A011RJ6

  11. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    1. Remove the 2 screws <C> or <D>.

      A011US6

    2. Apply protective tape to the areas shown in the illustration.

      A011UA8E01
      Text in Illustration
      *1 Protective Tape - -

    3. Disengage the 5 clips as shown in the illustration.

    4. Using a moulding remover, disengage the 8 clips to remove the No. 2 instrument panel garnish sub-assembly as shown in the illustration.