POWER WINDOW REGULATOR MOTOR (for Rear Door) INSPECTION

INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

1. Apply battery voltage to the motor connector according to the table below.

   

   Note

   Do not apply battery voltage to any terminals except terminals 1 and 2.

   Standard
   Measurement Condition Specified Condition Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Motor gear rotates clockwise Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Motor gear rotates counterclockwise

   Text in Illustration

   *a	Component without harness connected (Power Window Regulator Motor Assembly LH)
   *b	Motor Gear
   *c	Clockwise
   *d	Counterclockwise

   If the result is not as specified, replace the power window regulator motor assembly LH.

INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

1. Apply battery voltage to the motor connector according to the table below.

   

   Note

   Do not apply battery voltage to any terminals except terminals 1 and 2.

   Standard
   Measurement Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Motor gear rotates clockwise Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Motor gear rotates counterclockwise

   Text in Illustration

   *a	Component without harness connected (Power Window Regulator Motor Assembly RH)
   *b	Motor Gear
   *c	Counterclockwise
   *d	Clockwise

   If the result is not as specified, replace the power window regulator motor assembly RH.