REAR SEAT ASSEMBLY REASSEMBLY

  1. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH

    1. Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 8 new hog rings.

      A011SHB

      Note

      • Be careful not to damage the cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.

  2. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH

    1. Engage the 20 claws to install the rear seatback frame sub-assembly LH to the separate type rear seatback cover with pad LH.

      A011S0P

  3. INSTALL REAR SEATBACK CARPET LH

    1. Engage the 2 fasteners.

      A011R91E01
      Text in Illustration
      *1 Fastener

    2. Install the rear seatback carpet with the 3 clips.

  4. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE

    1. Engage the guide.

      A011UE2

    2. Install the rear seat center shoulder belt guide with the 2 screws.

  5. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH

    1. Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 10 new hog rings.

      A011RV6

      Note

      • Be careful not to damage the cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover RH.

  6. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY RH

    1. Engage the 20 claws to install the rear seatback frame sub-assembly RH to the separate type rear seatback cover with pad RH.

      A011R2V

  7. INSTALL REAR SEATBACK CARPET RH

    1. Engage the 3 fasteners.

      A011SPEE01
      Text in Illustration
      *1 Fastener

    2. Install the rear seatback carpet RH with the 5 clips.

  8. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

    1. Engage the guide.

      A011S8U

    2. Install the rear seat center armrest assembly with the bolt and washer.

  9. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH

    1. Install the rear side seatback cover sub-assembly LH to the rear side seatback pad LH.

      A011SII

  10. INSTALL REAR SEAT AIRBAG ASSEMBLY LH

    CAUTION:

    • The nuts must not be reused.

    • Make sure that the rear side seatback frame sub-assembly is not deformed. If it is, replace it with a new one.

    1. Install the rear seat airbag assembly to the rear side seatback frame sub-assembly with 2 new nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Engage the clamp to connect the airbag wire harness.

    3. Engage the 8 hooks to install the rear side seatback cover with pad.

  11. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

    1. Engage the guide.

      A011SYC

    2. Install the rear seat shoulder belt guide LH with the 2 screws.

  12. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  13. INSTALL REAR SEAT AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  14. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

    Tech Tips

    Use the same procedure as for the LH side.

  15. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

    1. Engage the 4 fasteners.

    2. Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 12 new hog rings.

      A011RFSE01
      Text in Illustration
      *1 Fastener - -

      Note

      • Be careful not to damage the cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

  16. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY

    1. Engage the 13 hooks to install the rear seat cushion frame sub-assembly.

      A011TUI