LUMBAR SWITCH INSPECTION

  1. INSPECT LUMBAR FRONT POWER SEAT SWITCH

    A011UUPE08

    1. Measure the resistance according to the value(s) in the table below.

      Text in Illustration
      *1 Hold Switch
      *2 Release Switch
      *a

      Component without harness connected

      (Lumbar Front Power Seat Switch)
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 - 5 Hold Below 1 Ω
      1 - 2
      3 - 2 Off
      1 - 2
      3 - 2 Release
      1 - 5

      If the result is not as specified, replace the lumbar front power seat switch.