CLOCK REMOVAL

  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    1. Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.

      A011QYZ

    2. Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.

      A011T4G

    3. Disengage the 3 claws and 2 clips as shown in the illustration.

      A011R78

    4. Disengage the clamp.

      A011RKN

    5. Disconnect the connector to remove the center instrument cluster finish panel assembly.

  2. REMOVE CLOCK ASSEMBLY

    1. Remove the 2 screws and clock assembly with instrument cluster finish panel cover from the No. 1 center instrument cluster finish panel.

      A011TN3

    2. Disengage the 4 claws and remove the clock assembly.

      A011S9M