METER / GAUGE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips

*: Use the Techstream.

  1. VEHICLE BROUGHT TO WORKSHOP

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    NEXT

  3. CHECK CAN COMMUNICATION SYSTEM*

    1. Check for DTC output Click here.

      Result
      Result Proceed to
      CAN communication DTC is not output. A
      CAN communication DTC is output. B
      B

      GO TO CAN COMMUNICATION SYSTEM Click here

      A

  4. CHECK FOR DTC*

    1. Check for DTC output Click here.

      Result
      Result Proceed to
      DTC is not output. A
      DTC is output. B
      B

      PROCEED TO DTC CHART Click here.
      A

  5. PROBLEM SYMPTOM CONFIRMATION

    NEXT

  6. SYMPTOM SIMULATION

    NEXT

  7. PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table Click here.

      NEXT

  8. CIRCUIT INSPECTION

    NEXT

  9. REPAIR OR REPLACE

    NEXT

  10. CONFIRMATION TEST

    NEXT
    END