BACK DOOR COURTESY SWITCH INSPECTION

  1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

    1. Check the operation of the door lock motor.

      1. Move the door lock to the close (lock) position.

        A011TKUE01

      2. Apply battery voltage to the door lock motor and check operation of the door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (B)

        Battery negative (-) → 2 (E)

        		 Luggage compartment door lock motor open (unlock) operation
        Text in Illustration
        *a

        Component without harness connected:

        (Luggage Compartment Door Lock Assembly)
        *b Close (Lock)
        *c Open (Unlock)

        If the result is not as specified, replace the luggage compartment door lock assembly.

    2. Check the operation of the door courtesy switch.

      1. Measure the resistance according to the value(s) in the table below.

        A011TKUE02
        Standard resistance
        Measurement Condition Door Lock Condition Specified Condition
        2 (E) - 3 (D+) Close (Lock) 10 kΩ or higher
        2 (E) - 3 (D+) Open (Unlock) Below 1 Ω
        Text in Illustration
        *a

        Component without harness connected:

        (Luggage Compartment Door Lock Assembly)
        *b Close (Lock)
        *c Open (Unlock)

        If the result is not as specified, replace the luggage compartment door lock assembly.