REAR DOOR COURTESY SWITCH INSPECTION

  1. INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

    1. Measure the resistance according to the value(s) in the table below.

      A011U2AE08
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - Switch body Not pushed (ON) Below 1 Ω
      Pushed (OFF) 10 kΩ or higher
      Text in Illustration
      *a

      Component without harness connected

      (Rear Door Courtesy Light Switch Assembly)
      *1 Switch Body

      If the result is not as specified, replace the rear door courtesy light switch assembly.