UNLOCK WARNING SWITCH INSPECTION

  1. INSPECT UNLOCK WARNING SWITCH ASSEMBLY

    A011V5OE06

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Switch free (Key removed) 10 kΩ or higher
      1 - 2 Switch pushed (Key set) Below 1 Ω
      Text in Illustration
      *a

      Component without harness connected

      (Unlock Warning Switch Assembly)

      If the result is not as specified, replace the unlock warning switch assembly.