INTEGRATION RELAY INSTALLATION

  1. INSTALL ENGINE ROOM JUNCTION BLOCK ASSEMBLY

    1. Connect the 2 connectors.

    2. Connect the 4 connectors to the engine room relay block assembly.

      A011S56

    3. Engage the 2 claws to install the engine room junction block assembly.

  2. INSTALL NO. 1 RELAY BLOCK COVER

    1. Engage the 2 claws to install the No. 1 relay block cover.

      A011REX

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here .