PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Parking Assist Monitor System |
DOOR CONTROL RECEIVER EXPRESSIONS
The type of door control receiver used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Vehicle Specification | Part Name in Manual | Actual Part Name |
|---|---|---|
| w/ Tire Pressure Warning | Door control receiver | Door control and tire pressure monitoring system receiver assembly |
| w/o Tire Pressure Warning | Door control receiver | Door control receiver |
PRECAUTIONS WHEN USING TECHSTREAM
When using the Techstream with the engine switch off to troubleshoot:
Connect the Techstream to the vehicle, and turn a courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and the vehicle begins.
After all DTCs are cleared, check if the trouble occurs again 6 seconds after the engine switch is turned on (IG).