BLIND SPOT MONITOR SENSOR INSTALLATION

  1. INSTALL BLIND SPOT MONITOR COVER LH

    1. Engage the claw.

    2. Install the blind spot monitor cover LH with the 2 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. INSTALL BLIND SPOT MONITOR COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. INSTALL BLIND SPOT MONITOR SENSOR LH

    1. Connect the connector.

    2. Install the blind spot monitor sensor LH with the 3 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Engage the 2 clamps.

  4. INSTALL BLIND SPOT MONITOR SENSOR RH

    1. Connect the connector.

    2. Install the blind spot monitor sensor RH with the 3 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Engage the clamp.

  5. INSTALL REAR BUMPER ASSEMBLY

    Click here

  6. PERFORM BLIND SPOT MONITOR BEAM AXIS INSPECTION

    Click here

  7. PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION

    Click here

    SST
    09870-60000   ( 09870-60010 )
    09870-60040

  8. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here