NAVIGATION ECU INSTALLATION

INSTALL AIR CONDITIONING CONTROL ASSEMBLY

1. Engage the guide and 4 clips to install the air conditioning control assembly as shown in the illustration.

   

INSTALL NO. 1 RADIO BRACKET

1. w/o Navigation System:

   1. Install the No. 1 radio bracket with the 5 screws.

2. w/ Navigation System:

   1. Install the No. 1 radio bracket with the 7 screws.

INSTALL NO. 2 RADIO BRACKET

1. w/o Navigation System:

   1. Install the No. 2 radio bracket with the 5 screws.

2. w/ Navigation System:

   1. Install the No. 2 radio bracket with the 7 screws.

INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY

1. Connect each connector.

2. Engage the 8 clips to the vehicle body to temporarily install the radio receiver assembly with air conditioning control assembly.

3. Install the radio receiver assembly with air conditioning control assembly with the 4 bolts.

INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

1. Engage the 6 clips to install the No. 2 instrument panel register assembly.

   

   Note

   When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.

INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

1. Connect the connector.

2. Engage the clamp.

3. Engage the 6 clips and 7 claws to install the center instrument cluster finish panel assembly.

   

INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

1. Connect each connector.

2. Engage the 4 clips and guide.

3. Install the upper console panel sub-assembly with the 2 screws <C> or <D>.

INSTALL BOX BOTTOM MAT

1. Install the box bottom mat.